|   +1.540.450.8375

FAQs     Contact Us

This page contains the aviation and industrial products offered by our distributor, Applied Industrial Technologies, Inc. To become a customer of Applied Industrial 
Technologies, Inc, email or call Mark Kaliszewki at (401) 573-4998.
Find an Applied Industrial Technologies, Inc. near you.


Applied Industrial Technologies,  distributor of AEROGREEN’s Specialty Cleaners understands how critical safety is to the Aviation industry. Keeping aircraft and airfields clean with AEROGREEN’s state-of-the-art cleaners and degreasers, custom formulated for the Aviation industry, will help your airport achieve the highest levels of safety in the air and on the ground while minimizing operating costs.

Dirt and grime on airplanes, helicopters and airfields…
– seriously endangers pilots, passengers, and ground crews – makes it hard to conduct a good inspection of your aircraft – disrupts airflow over an airplane’s wingtips – harms all the rotating components on a helicopter – covers up important safety signs on aircraft and the airfield – makes aircraft and the airfield more expensive to maintain – harms the image of your facility

Keep your aircraft and airfield clean and safe, reduce your maintenance costs, and enhance the image of your facility with AEROGREEN 4015, 4065, 4035, 4025.

intheairimage4015 Concentrated Aircraft Exterior Cleaner
AEROGREEN 4015 Concentrated Aircraft Exterior Cleaner is water-based, readily biodegradable aircraft and helicopter cleaner that safely removes soils from all painted and unpainted plastic and metal surfaces better than traditional hazardous solvents. AEROGREEN 4015 is powerful enough to remove the most stubborn dirt and grime. Diluted with water 8 to 1, this cost effective, user-friendly, non-toxic cleaner, can be easily applied by brush, foam generator, mop, spray or sponge. AEROGREEN 4015 quickly removes exhaust residue, oily soot and oxidized organic fluids, leaving your aircraft ‘showroom’ clean, easier to maintain and safer to fly.

4065 Ready To Use Aircraft Exterior Cleaner 

AEROGREEN 4065 Ready To Use Aircraft Exterior Cleaner is an eco-friendly, water-based cleaner that safely and efficiently cleans your aircraft, making them easier to maintain and safer to operate. This non-flammable, readily biodegradable cleaner is a superior product  that when conveniently used straight out of the 55 gallon drum, rinses free with water, without leaving a residue or film. AEROGREEN 4065 quickly removes carbonaceous soils associated with jet engine and helicopter operations, as well as caked on dirt and grime. AEROGREEN 4065’s state-of-the-art technology makes it the safest and the most effective aircraft cleaner on the market today.


onthegroundimage4035 Runway Rubber Remover
AEROGREEN 4035 Runway Rubber Remover is a 100% readily biodegradable, eco-friendly, strategically designed cleaning solution that emulsifies rubber from the runway surface dissolving the rubber residue into the solution. It is a very powerful and effective chemical cleaning technology, that when combined with heavy duty sweeper / broom scrubbing action or hydro agitation, safely and quickly removes the carbonized rubber residue build-up on airport runways that can make the touch down zone slippery and hazardous. AEROGREEN 4035 Runway Rubber Remover thoroughly removes runway rubber residue, making the touch down zone safe for landing aircraft. It is a residue-free, non-hazardous, non-flammable, non-combustible solution that contains no caustic ingredients, so it won’t harm metals, runway pavement seals and caulking compounds, runway lights, landing aircraft or airport personnel.


4025MMA-Before-After4025 Mold, Mildew and Algae Cleaner 
AEROGREEN 4025 Mold, Mildew and Algae Cleaner is a concentrated, effective, eco-friendly cleaner-degreaser that quickly and safely removes mold, mildew and algae from airfield surfaces. Apply AEROGREEN 4025 then rinse with high pressure water.

AEROGREEN 4025 Mold Mildew and Algae Cleaner…
-makes your airfields clean and safe again

-restores safe friction levels on your runways
-safely restores airfield markings visibility


AEROGREEN Specialty Cleaners eco-friendly, water-based cleaning products are specially formulated to tackle the toughest industrial cleaning and degreasing jobs while being gentle on the environment, your facilities, equipment and workforce. They provide an environmentally sound, cost effective and safe solution for cleaning and maintenance professionals in a wide range of industries including commercial, industrial, aviation and the military.

AEROGREEN products are very effective and easy to use. Brushed or sprayed on, utilized in a cold or heated dip tank, or applied with a high pressure washer, AEROGREEN Specialty Cleaners work so fast and are so versatile, that you can reduce the number of cleaners in your inventory, saving you time and money.

Safe for use on all surfaces, AEROGREEN Specialty Cleaners are non-flammable, non-toxic, and competitively priced.  By offering a high performance, environmentally friendly product line of cleaners and degreasers, Hi-Lite Solution’s AEROGREEN Specialty Cleaners provide industrial, commercial and governmental facilities throughout the United States and the world with an opportunity to ‘get it clean and keep it green’.


4110 Paint Prep Cleaner
In order to Go Green, and reduce VOC’s in the paint industry, solvent based paints are rapidly being replaced by water-based paints.  AEROGREEN’s 4110 Paint Prep Cleaner, the first non-toxic, water-based product on the market designed to safely clean and prepare all surfaces for paint, works better than traditional toxic cleaners with the industry’s new paints. Because the paint and AEROGREEN 4110 both use water-based technology, there are very compatible, so the paint bonds better to the surface, leaving little or no imperfections in the painted surface. When used alone or in combination with the other AEROGREEN products in the Sherwin Williams ProVisions line, cleaning the surface with AEROGREEN 4110 is the final and most important step to ensure a professional flawless finish.


4130 High Pressure Cleaner Degreaser
AEROGREEN 4130 High Pressure Cleaner Degreaser is a concentrated, very powerful, eco-friendly, aqueous cleaner. It can be used to thoroughly clean all types of vehicles, heavy machinery and industrial equipment. It is also very effective when cleaning large surfaces such as exterior buildings, interior walls, ceilings, floors and stairways. When used with both cold and heated high pressure washers, AEROGREEN 4130 attacks, quickly breaks down and safely removes dirt, concrete dust, exhaust soot, oils, greases, hydraulic fluids and fuel residue, as well as a variety of soils. It dries quickly, leaving a residue free clean surface. AEROGREEN 4130 is also very effective when used as a pre-soak solution prior to steam cleaning.


4140 Concrete Cleaner
AEROGREEN 4140 Concrete Cleaner is an extremely efficient, water-based, readily biodegradable, high pressure cleaner degreaser. Designed to be cost effective and easy to use with cold or heated high pressure washers, this product is formulated to be a safe, non-hazardous, drop-in replacement for traditional toxic solvents. AEROGREEN 4140 quickly and easily removes caked on dirt, oils, greases, fuel residue, mold, mildew, fungus, along with a variety of soils from any concrete surface.


4160 Parts Washer Degreaser
AEROGREEN 4160 Parts Washer Degreaser is designed to provide superior cleaning of mechanical parts, engine support equipment, automotive and aircraft components. It’s very powerful formula makes it easy to remove oils, grease and other tough soils. AEROGREEN 4160 is mixed with water in a dip or immersion tank, ultrasonic tank, or in-line system. Then the parts are cleaned in the solution. The solution can last for weeks depending on the frequency of use and the size of the tank. AEROGREEN 4160 contains a rust inhibitor. After the part has been cleaned it can be immediately worked on or shelved for some time without any corrosion forming on the surface.


4175 Ink and Coating Remover
AEROGREEN 4175 Ink and Coating Remover has a special additive in its non-toxic, water soluble formula that makes it very effective in removing tars; solvent, oil and water based inks; and adhesives on equipment, machines and floors that need  to be cleaned, or are about to be painted.  Before cleaning the object to be painted with AEROGREEN 4175, use AEROGREEN 4110 Paint Prep Cleaner to remove all the oils, dirts and greases on the surface first. The tars, inks and adhesives left behind are then cleaned away using AEROGREEN 4175. After that, clean the piece again with AEROGREEN 4110 to remove any residue left behind from AEROGREEN 4175 to ensure that the paint properly adheres to the surface.


4180 Paint & Graffiti Remover
AEROGREEN 4180 PAINT REMOVER is a eco-friendly liquid paint remover that replaces the use of Methylene Chloride and other hazardous substances to remove most industrial , water reducible paints and primers including, lacquers, acrylic enamels, solvent based alkyd paints, high & low gloss urethanes, epoxy paints, powder coat paints, inks, adhesives and a variety of other coatings from many types of substrates including steel, cast iron, aluminum, concrete, masonry and plastics.

AC-10 Rust Remover and Metal Prep
AEROGREEN AC-10 Rust Remover and Metal Prep is specially formulated to remove rust or any type of oxidation on the surface of a metal part prior to painting. Depending on the surface to be cleaned, this clear, odorless, innovative product can be diluted with water and brushed on, sprayed on, or used in cold or heated dip tanks for the best results. AEROGREEN AC-10 is also used when a part has been welded prior to painting. The welded area of the part is wiped down with AEROGREEN AC-10 to prep the metal. After removing rust or prepping the metal with AEROGREEN AC-10, the part is given a final wipe down with AEROGREEN 4110 prior to painting. 


To become a customer of Applied Industrial Technologies, Inc,  email or call Mark Kaliszewki at (401) 573-4998.