Hi-Lite Solutions, the manufacturer of AEROGREEN’s Specialty Cleaners understands how critical safety is to the Aviation industry. Keeping aircraft and airfields clean with AEROGREEN’s state-of-the-art cleaners and degreasers, custom formulated for the Aviation industry, will help your airport achieve the highest levels of safety in the air and on the ground while minimizing operating costs.
Dirt and grime on airplanes, helicopters and airfields
– seriously endangers pilots, passengers, and ground crews – makes it hard to conduct a good inspection of your aircraft – disrupts airflow over an airplane’s wingtips – harms all the rotating components on a helicopter – covers up important safety signs on aircraft and the airfield – makes aircraft and the airfield more expensive to maintain – harms the image of your facility
Keep your aircraft and airfield clean and safe, reduce your maintenance costs, and enhance the image of your facility with AEROGREEN 4015, 4065, 4035, 4025.
4015 Concentrated Aircraft Exterior Cleaner
AEROGREEN 4015 Concentrated Aircraft Exterior Cleaner is water-based, readily biodegradable aircraft and helicopter cleaner that safely removes soils from all painted and unpainted plastic and metal surfaces better than traditional hazardous solvents. AEROGREEN 4015 is powerful enough to remove the most stubborn dirt and grime. Diluted with water 8 to 1, this cost effective, user-friendly, non-toxic cleaner, can be easily applied by brush, foam generator, mop, spray or sponge. AEROGREEN 4015 quickly removes exhaust residue, oily soot and oxidized organic fluids, leaving your aircraft ‘showroom’ clean, easier to maintain and safer to fly.
Download Data Sheet l Download SDS
4065 Ready To Use Aircraft Exterior Cleaner
AEROGREEN 4065 Ready To Use Aircraft Exterior Cleaner is an eco-friendly, water-based cleaner that safely and efficiently cleans your aircraft, making them easier to maintain and safer to operate. This non-flammable, readily biodegradable cleaner is a superior product that when conveniently used straight out of the 55 gallon drum, rinses free with water, without leaving a residue or film. AEROGREEN 4065 quickly removes carbonaceous soils associated with jet engine and helicopter operations, as well as caked on dirt and grime. AEROGREEN 4065’s state-of-the-art technology makes it the safest and the most effective aircraft cleaner on the market today.
Download Data Sheet l Download SDS
4035 Runway Rubber Remover
AEROGREEN 4035 Runway Rubber Remover is a 100% readily biodegradable, eco-friendly, strategically designed cleaning solution that emulsifies rubber from the runway surface dissolving the rubber residue into the solution. It is a very powerful and effective chemical cleaning technology, that when combined with heavy duty sweeper / broom scrubbing action or hydro agitation, safely and quickly removes the carbonized rubber residue build-up on airport runways that can make the touch down zone slippery and hazardous. AEROGREEN 4035 Runway Rubber Remover thoroughly removes runway rubber residue, making the touch down zone safe for landing aircraft. It is a residue-free, non-hazardous, non-flammable, non-combustible solution that contains no caustic ingredients, so it won’t harm metals, runway pavement seals and caulking compounds, runway lights, landing aircraft or airport personnel.
4025 Airport High-Pressure Cleaner
AEROGREEN 4025 Airport High Pressure Cleaner is a concentrated cleaner-degreaser that is the perfect solution to keeping your airport ‘green’, clean, safe and easy to maintain. Diluted with water and used with both cold and heated high pressure washers, it quickly and safely removes dirt, exhaust soot, fuel deposits, greases, hydraulic fluids, oils and a variety of other residues from airport terminals, hangars, tarmacs, parking lots, and ground support equipment. AEROGREEN 4025 can be used with dilution ratios that make the end use solution very cost effective, while still being incredibly efficient.
4025 Mold, Mildew and Algae Cleaner
AEROGREEN 4025 Mold, Mildew and Algae Cleaner is a concentrated, effective, eco-friendly cleaner-degreaser that quickly and safely removes mold, mildew and algae from airfield surfaces. Apply AEROGREEN 4025 then rinse with high pressure water.
AEROGREEN 4025 Mold Mildew and Algae Cleaner…
-makes your airfields clean and safe again
-restores safe friction levels on your runways
-safely restores airfield markings visibility
AEROGREEN ‘Aviation’ cleaning products … Proven and Tested
AEROGREEN 4015, 4035, 4065 and 4025 ‘Aviation’ cleaning product
– safe for personnel / require no respirator or hazardous training
– user-friendly / easy to apply, easy to rinse, residue free
– will not harm airport equipment, landscaping, or contaminate ground water
– prevent corrosion by working safely and effectively on all metals
– compatible with oil / water separators and wastewater treatment systems
– non-combustible / cheaper to ship, easier to store, safer to use
– help airports meet their ‘Green Mandate’
Meet or exceed the accepted criteria set forth by the Federal Aviation Association for the following Accepted Testing Methods for Aircraft Cleaning Materials as seen in AC No: 43-205:
– Sandwich Corrosion Test – ASTM 1110
– Immersion Corrosion Test – ASTM F 483
– Hydrogen Embrittlement – ASTM F 519
– Effect on Painted Surfaces – ASTM F 502
– Acrylic Crazing Test – ASTM F 484
– Residue – ASTM F 485
Have been proven and tested, and are certified to:
– McDonnell Douglas CSD #1
– Boeing Test D6-17487 Revision P
– AMS 1526C
– 40 CFR 796.3100; Aerobic Aquatic Biodegradation
AEROGREEN ‘Aviation’ cleaning products are aerospace NESHAPS compliant, contain no hazardous materials as defined by the EPA, and no SARA 373 or RCRA listed ingredients.